7317.00.55.01

HTS 10

Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper › Made of round wire › Collated roofing nails with a length of 20.6 mm to 46.1 mm, a head diameter of 8.3 mm to 10.6 mm, a shank diameter of 2.5 mm to 3.2 mm, whether or not galvanized

Classification

Heading/Sub Stat Suffix Article Description Unit of Qty General Special Column 2
73.17
..0Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper:———
..0.0.Made of round wireFree—3.5%
01Collated roofing nails with a length of 20.6 mm to 46.1 mm, a head diameter of 8.3 mm to 10.6 mm, a shank diameter of 2.5 mm to 3.2 mm, whether or not galvanized———
Governing Provision
7317.00.55

Made of round wire

Governed by 7317.00.55 (inherited_rate_bearing_ancestor)

Additional Duties & Quota
Additional Duties
None
Quota
None
Trade Programs

None applicable

Rate Changes

8 rate changes detected across revisions

Description
Collated roofing nails with a length of 20.6<il>20.6 mmmm</il> to 46.1<il>46.1 mm,mm</il>, a head diameter of 8.3<il>8.3 mmmm</il> to 10.6<il>10.6 mm,mm</il>, a shank diameter of 2.5<il>2.5 mmmm</il> to 3.2<il>3.2 mm,mm</il>, whether or not galvanized
Description
Collated roofing nails with a length of <il>20.620.6 mm</il>mm to <il>46.146.1 mm</il>,mm, a head diameter of <il>8.38.3 mm</il>mm to <il>10.610.6 mm</il>,mm, a shank diameter of <il>2.52.5 mm</il>mm to <il>3.23.2 mm</il>,mm, whether or not galvanized
Description
Collated roofing nails with a length of 20.6<il>20.6 mmmm</il> to 46.1<il>46.1 mm,mm</il>, a head diameter of 8.3<il>8.3 mmmm</il> to 10.6<il>10.6 mm,mm</il>, a shank diameter of 2.5<il>2.5 mmmm</il> to 3.2<il>3.2 mm,mm</il>, whether or not galvanized
Description
Collated roofing nails with a length of <il>20.620.6 mm</il>mm to <il>46.146.1 mm</il>,mm, a head diameter of <il>8.38.3 mm</il>mm to <il>10.610.6 mm</il>,mm, a shank diameter of <il>2.52.5 mm</il>mm to <il>3.23.2 mm</il>,mm, whether or not galvanized
Description
Collated roofing nails with a length of 20.6<il>20.6 mmmm</il> to 46.1<il>46.1 mm,mm</il>, a head diameter of 8.3<il>8.3 mmmm</il> to 10.6<il>10.6 mm,mm</il>, a shank diameter of 2.5<il>2.5 mmmm</il> to 3.2<il>3.2 mm,mm</il>, whether or not galvanized
Description
Collated roofing nails with a length of <il>20.620.6 mm</il>mm to <il>46.146.1 mm</il>,mm, a head diameter of <il>8.38.3 mm</il>mm to <il>10.610.6 mm</il>,mm, a shank diameter of <il>2.52.5 mm</il>mm to <il>3.23.2 mm</il>,mm, whether or not galvanized
Description
Collated roofing nails with a length of 20.6<il>20.6 mmmm</il> to 46.1<il>46.1 mm,mm</il>, a head diameter of 8.3<il>8.3 mmmm</il> to 10.6<il>10.6 mm,mm</il>, a shank diameter of 2.5<il>2.5 mmmm</il> to 3.2<il>3.2 mm,mm</il>, whether or not galvanized
Description
Collated roofing nails with a length of <il>20.620.6 mm</il>mm to <il>46.146.1 mm</il>,mm, a head diameter of <il>8.38.3 mm</il>mm to <il>10.610.6 mm</il>,mm, a shank diameter of <il>2.52.5 mm</il>mm to <il>3.23.2 mm</il>,mm, whether or not galvanized
HTS 7317.00.55.01 — Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper › Made of round wire › Collated roofing nails with a length of 20.6 mm to 46.1 mm, a head diameter of 8.3 mm to 10.6 mm, a shank diameter of 2.5 mm to 3.2 mm, whether or not galvanized | RefundArrow | RefundArrow